Batt Drafter mod.ST4-200

Working width: up to 4000 mm
First pair of cylinder speed: 1÷10 m/min
Second pairs of cylinders speed: 2÷20 m/min
Third pair of cylinders speed: 4÷30 m/min
Distance between cylinders: 120 mm
Cylinders diameter: 100 mm
Installed power: 4,5 KW
Compressed air requirements: 6 bar/200NL/h

This machine is particularly suitable for stretching web layers coming from crosslappers, up to a max weight of 500 g/m2. Stretching takes place in a controlled way and can be adjusted with the machine in operation. The rollers are partially supplied with special clothing suitable to comb fibres, thus making them parallel.
The machine consists of two lateral frames where cylinder guides and sliding supports are located.
The machine works with 3 pairs of high thickness rollers, diameter 100 mm. The lower cylinders are fixed., whereas the upper ones are housed on bronze guides. The upper cylinders are vertically adjusted by means of pneumatic jacks; the final distance is adjusted by means of moving limit piece through a manual wheel with micrometric screws.
The first two pairs of cylinders are covered with rigid clothing while, the third pair is smooth. Each pair of cylinders is driven by a geared-motor, all pairs of cylinders are connected to each other by means of toothed wheels.
The distance between each pair of cylinders is 120 mm. Should material get stuck between cylinders, limit switches are activated, thus immediately stopping the machine